summaryrefslogtreecommitdiff
path: root/BKUAppletExt/src/main/resources/at/gv
diff options
context:
space:
mode:
Diffstat (limited to 'BKUAppletExt/src/main/resources/at/gv')
-rw-r--r--BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages.properties69
-rw-r--r--BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages_en.properties68
2 files changed, 0 insertions, 137 deletions
diff --git a/BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages.properties b/BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages.properties
deleted file mode 100644
index 977d6e3a..00000000
--- a/BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages.properties
+++ /dev/null
@@ -1,69 +0,0 @@
-# Copyright 2008 Federal Chancellery Austria and
-# Graz University of Technology
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-title.activation=<html>Aktivierung</html>
-title.pin.mgmt=<html>PIN Verwaltung</html>
-title.activate.pin=<html>PIN Aktivieren</html>
-title.change.pin=<html>PIN \u00C4ndern</html>
-title.unblock.pin=<html>PIN Entsperren</html>
-title.verify.pin=<html>PIN Eingeben</html>
-title.activate.success=<html>Erfolg</html>
-title.change.success=<html>Erfolg</html>
-
-# removed message.* prefix to reuse keys as help keys
-pin.mgmt=<html>Die Karte verf\u00FCgt \u00FCber {0} PINs</html>
-activate.pin=<html>{0} eingeben und best\u00E4tigen</html>
-change.pin=<html>{0} eingeben und best\u00E4tigen</html>
-unblock.pin=<html>PUK zu {0} eingeben</html>
-verify.pin=<html>{0} eingeben</html>
-verify.pinpad=<html>{0} ({1} stellig) am Kartenleser eingeben (und best\u00E4tigen).</html>
-activate.pinpad=<html>{0} ({1} stellig) am Kartenleser eingeben und wiederholen (jeweils best\u00E4tigen).</html>
-change.pinpad=<html>Alte {0} ({1} stellig) am Kartenleser eingeben, danach neue {0} eingeben und wiederholen (jeweils best\u00E4tigen). </html>
-unblock.pinpad=<html>{0} ({1} stellig) am Kartenleser eingeben (und best\u00E4tigen).</html>
-activate.success=<html>{0} wurde erfolgreich aktiviert.</html>
-change.success=<html>{0} wurde erfolgreich ge\u00E4ndert.</html>
-
-label.activation=<html>e-card Aktivierungsprozess</html>
-label.activation.step=<html>Schritt {0}</html>
-label.activation.idle=<html>Warte auf Server...</html>
-label.old.pin=<html>Alte {0}:</html>
-label.new.pin=<html>Neue {0}:</html>
-label.repeat.pin=<html>Best\u00E4tigung:</html>
-
-button.activate=Aktivieren
-button.change=\u00C4ndern
-button.unblock=Entsperren
-button.verify=Abfragen
-
-help.activation=help.activation
-help.pin.mgmt=help.pin.mgmt
-
-err.status=<html>Der Status der PINs konnte nicht \u00FCberpr\u00FCft werden.</html>
-err.activate=<html>Beim Aktivieren der {0} trat ein Fehler auf.</html>
-err.change=<html>Beim \u00C4ndern der {0} trat ein Fehler auf.</html>
-err.unblock=<html>Das Entsperren der {0} wird nicht unterst\u00FCtzt.</html>
-err.verify=<html>VERIFY ERROR (TODO)</html>
-err.retries=<html>Falsche {0}, noch {1} Versuche</html>
-err.locked=<html>{0} gesperrt.</html>
-err.not.active=<html>{0} nicht aktiviert.</html>
-err.pin.format=<html>Ung\u00FCltige {0} L\u00E4nge, verlangt sind {1} Stellen.</html>
-err.pin.confirmation=<html>{0} und Best\u00E4tigung stimmen nicht \u00FCberein.</html>
-err.pin.operation.aborted=<html>Der Vorgang f\u00FCr {0} wurde abgebrochen.</html>
-err.unsupported.card=<html>Die Karte wird nicht unterst\u00FCtzt</html>
-
-status.not.active=NICHT AKTIV
-status.active=AKTIV
-status.blocked=GESPERRT
-status.unknown=UNBEKANNT
diff --git a/BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages_en.properties b/BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages_en.properties
deleted file mode 100644
index 7f01971b..00000000
--- a/BKUAppletExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages_en.properties
+++ /dev/null
@@ -1,68 +0,0 @@
-# Copyright 2008 Federal Chancellery Austria and
-# Graz University of Technology
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-title.activation=<html>Activation</html>
-title.pin.mgmt=<html>PIN Management</html>
-title.activate.pin=<html>Activate PIN</html>
-title.verify.pin=<html>Enter PIN</html>
-title.change.pin=<html>Change PIN</html>
-title.unblock.pin=<html>Unblock PIN</html>
-title.activate.success=<html>Success</html>
-title.change.success=<html>Success</html>
-
-# removed message.* prefix to reuse keys as help keys
-pin.mgmt=<html>The smartcard has {0} PINs</html>
-activate.pin=<html>Enter and confirm {0}</html>
-change.pin=<html>Enter and confirm {0}</html>
-unblock.pin=<html>Enter PUK for {0}</html>
-verify.pin=<html>Enter {0}</html>
-verify.pinpad=<html>Enter {0} ({1} digits) on cardreader (and confirm).</html>
-activate.pinpad=<html>Enter {0} ({1} digits) on cardreader and repeat (confirm in each case).</html>
-change.pinpad=<html>Enter old {0} ({1} digits) on cardreader, then enter new {0} and repeat (confirm in each case).</html>
-unblock.pinpad=<html>Enter {0} ({1} digits) on cardreader (and confirm).</html>
-activate.success=<html>{0} successfully activated</html>
-change.success=<html>{0} successfully changed</html>
-
-label.activation=<html>e-card activation process</html>
-label.activation.step=<html>Step {0}</html>
-label.activation.idle=<html>Wait for server...</html>
-label.old.pin=<html>Old {0}:</html>
-label.new.pin=<html>New {0}:</html>
-label.repeat.pin=<html>Confirmation:</html>
-
-button.activate=Activate
-button.change=Change
-button.unblock=Unblock
-button.verify=Query
-
-help.activation=help.activation
-help.pin.mgmt=help.pin.mgmt
-
-err.status=<html>PIN statuses could not be read.</html>
-err.activate=<html>An error occured during the activation of {0}.</html>
-err.change=<html>An error occured during the changing of {0}.</html>
-err.unblock=<html>Unblocking of {0} is not supported.</html>
-err.retries=<html>Wrong {0}, {1} tries remaining</html>
-err.locked=<html>{0} locked</html>
-err.not.active=<html>{0} not activated.</html>
-err.pin.format=<html>Invalid {0} length, {1} digit(s) required.</html>
-err.pin.confirmation=<html>{0} and confirmation do not match.</html>
-err.pin.operation.aborted=<html>The operation on {0} was aborted.</html>
-err.unsupported.card=<html>This card is not supported</html>
-
-status.not.active=NOT ACTIVE
-status.active=ACTIVE
-status.blocked=BLOCKED
-status.unknown=UNKNOWN