2 files changed, 137 insertions, 0 deletions
diff --git a/BKUGuiExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages.properties b/BKUGuiExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages.properties
new file mode 100644
index 00000000..977d6e3a
--- /dev/null
+++ b/BKUGuiExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages.properties
@@ -0,0 +1,69 @@
+# Copyright 2008 Federal Chancellery Austria and
+# Graz University of Technology
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+title.activation=<html>Aktivierung</html>
+title.pin.mgmt=<html>PIN Verwaltung</html>
+title.activate.pin=<html>PIN Aktivieren</html>
+title.change.pin=<html>PIN \u00C4ndern</html>
+title.unblock.pin=<html>PIN Entsperren</html>
+title.verify.pin=<html>PIN Eingeben</html>
+title.activate.success=<html>Erfolg</html>
+title.change.success=<html>Erfolg</html>
+
+# removed message.* prefix to reuse keys as help keys
+pin.mgmt=<html>Die Karte verf\u00FCgt \u00FCber {0} PINs</html>
+activate.pin=<html>{0} eingeben und best\u00E4tigen</html>
+change.pin=<html>{0} eingeben und best\u00E4tigen</html>
+unblock.pin=<html>PUK zu {0} eingeben</html>
+verify.pin=<html>{0} eingeben</html>
+verify.pinpad=<html>{0} ({1} stellig) am Kartenleser eingeben (und best\u00E4tigen).</html>
+activate.pinpad=<html>{0} ({1} stellig) am Kartenleser eingeben und wiederholen (jeweils best\u00E4tigen).</html>
+change.pinpad=<html>Alte {0} ({1} stellig) am Kartenleser eingeben, danach neue {0} eingeben und wiederholen (jeweils best\u00E4tigen). </html>
+unblock.pinpad=<html>{0} ({1} stellig) am Kartenleser eingeben (und best\u00E4tigen).</html>
+activate.success=<html>{0} wurde erfolgreich aktiviert.</html>
+change.success=<html>{0} wurde erfolgreich ge\u00E4ndert.</html>
+
+label.activation=<html>e-card Aktivierungsprozess</html>
+label.activation.step=<html>Schritt {0}</html>
+label.activation.idle=<html>Warte auf Server...</html>
+label.old.pin=<html>Alte {0}:</html>
+label.new.pin=<html>Neue {0}:</html>
+label.repeat.pin=<html>Best\u00E4tigung:</html>
+
+button.activate=Aktivieren
+button.change=\u00C4ndern
+button.unblock=Entsperren
+button.verify=Abfragen
+
+help.activation=help.activation
+help.pin.mgmt=help.pin.mgmt
+
+err.status=<html>Der Status der PINs konnte nicht \u00FCberpr\u00FCft werden.</html>
+err.activate=<html>Beim Aktivieren der {0} trat ein Fehler auf.</html>
+err.change=<html>Beim \u00C4ndern der {0} trat ein Fehler auf.</html>
+err.unblock=<html>Das Entsperren der {0} wird nicht unterst\u00FCtzt.</html>
+err.verify=<html>VERIFY ERROR (TODO)</html>
+err.retries=<html>Falsche {0}, noch {1} Versuche</html>
+err.locked=<html>{0} gesperrt.</html>
+err.not.active=<html>{0} nicht aktiviert.</html>
+err.pin.format=<html>Ung\u00FCltige {0} L\u00E4nge, verlangt sind {1} Stellen.</html>
+err.pin.confirmation=<html>{0} und Best\u00E4tigung stimmen nicht \u00FCberein.</html>
+err.pin.operation.aborted=<html>Der Vorgang f\u00FCr {0} wurde abgebrochen.</html>
+err.unsupported.card=<html>Die Karte wird nicht unterst\u00FCtzt</html>
+
+status.not.active=NICHT AKTIV
+status.active=AKTIV
+status.blocked=GESPERRT
+status.unknown=UNBEKANNT
diff --git a/BKUGuiExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages_en.properties b/BKUGuiExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages_en.properties
new file mode 100644
index 00000000..7f01971b
--- /dev/null
+++ b/BKUGuiExt/src/main/resources/at/gv/egiz/bku/gui/ActivationMessages_en.properties
@@ -0,0 +1,68 @@
+# Copyright 2008 Federal Chancellery Austria and
+# Graz University of Technology
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+title.activation=<html>Activation</html>
+title.pin.mgmt=<html>PIN Management</html>
+title.activate.pin=<html>Activate PIN</html>
+title.verify.pin=<html>Enter PIN</html>
+title.change.pin=<html>Change PIN</html>
+title.unblock.pin=<html>Unblock PIN</html>
+title.activate.success=<html>Success</html>
+title.change.success=<html>Success</html>
+
+# removed message.* prefix to reuse keys as help keys
+pin.mgmt=<html>The smartcard has {0} PINs</html>
+activate.pin=<html>Enter and confirm {0}</html>
+change.pin=<html>Enter and confirm {0}</html>
+unblock.pin=<html>Enter PUK for {0}</html>
+verify.pin=<html>Enter {0}</html>
+verify.pinpad=<html>Enter {0} ({1} digits) on cardreader (and confirm).</html>
+activate.pinpad=<html>Enter {0} ({1} digits) on cardreader and repeat (confirm in each case).</html>
+change.pinpad=<html>Enter old {0} ({1} digits) on cardreader, then enter new {0} and repeat (confirm in each case).</html>
+unblock.pinpad=<html>Enter {0} ({1} digits) on cardreader (and confirm).</html>
+activate.success=<html>{0} successfully activated</html>
+change.success=<html>{0} successfully changed</html>
+
+label.activation=<html>e-card activation process</html>
+label.activation.step=<html>Step {0}</html>
+label.activation.idle=<html>Wait for server...</html>
+label.old.pin=<html>Old {0}:</html>
+label.new.pin=<html>New {0}:</html>
+label.repeat.pin=<html>Confirmation:</html>
+
+button.activate=Activate
+button.change=Change
+button.unblock=Unblock
+button.verify=Query
+
+help.activation=help.activation
+help.pin.mgmt=help.pin.mgmt
+
+err.status=<html>PIN statuses could not be read.</html>
+err.activate=<html>An error occured during the activation of {0}.</html>
+err.change=<html>An error occured during the changing of {0}.</html>
+err.unblock=<html>Unblocking of {0} is not supported.</html>
+err.retries=<html>Wrong {0}, {1} tries remaining</html>
+err.locked=<html>{0} locked</html>
+err.not.active=<html>{0} not activated.</html>
+err.pin.format=<html>Invalid {0} length, {1} digit(s) required.</html>
+err.pin.confirmation=<html>{0} and confirmation do not match.</html>
+err.pin.operation.aborted=<html>The operation on {0} was aborted.</html>
+err.unsupported.card=<html>This card is not supported</html>
+
+status.not.active=NOT ACTIVE
+status.active=ACTIVE
+status.blocked=BLOCKED
+status.unknown=UNKNOWN